Ten ways to extend the UAV flight time - part 1

Like many tech geeks and drone lovers, you may also be disappointed with the drones' short flight times. The average flight time for an entry-level quadcopter is only seven minutes. Even the most expensive drone, the longest flight time does not exceed 30 minutes. Even so, you can still do something to extend the flight time of your quadcopter. Next, this article will share 10 ways to help you extend your drone's lifetime.

What are the factors that affect the UAV lifetime?

Today's entry-level quadcopter RC Drones will last for approximately 7 minutes for a flight, such as the Syma X5C and the UDI U818A. Obviously, there are many factors that can reduce the life of your UAV, including wind, weight, flight style, and video. For example, UAV life in windy weather will be shorter than usual. Flying UAVs with heavy payloads, such as a camera or paddle cover, or fierce flights can result in significantly reduced battery life.

Method 10: Use a larger battery

Today almost all UAVs use lithium-polymer batteries. Lithium-polymer batteries are light in weight and discharge at higher rates (more energy can be stored/released) than conventional batteries. As you might expect, lithium-polymer batteries come in many sizes: the Cheerson CX-10, the smallest quadrocopter in the world, uses a relatively small 100mAh battery, while the larger Syma X8C rc fpv uses a 2000mAh battery. In general, a larger battery can support longer battery life. Note: Sometimes, the battery's large capacity is not necessarily a good thing because larger batteries usually mean more weight. If the battery is too heavy, it may shorten the lifetime of the drone.

Method 9: Remove the camera (if detachable)

It is worth noting that camera and UAV lifetime are closely related. So when you record a video, you will need more battery power than usual (not available on the Hubsan X4 H107C since the camera is not detachable). This method can be only applied to the rc camera drone.

Method 8: Grasp the charging opportunity

The correct charging time can extend battery life. In order to ensure the best lifetime, before each use, you should be the right charge. If you do not intend to fly a drone in the near future, no need to charge. Just fully charge the battery before you decide to use it.

Method 7: Avoid flying in inclement weather

Flying drones under the strong wind weather is dangerous and can cause the drone to fall or even injure innocent people. When you fly a drone in strong winds, it is equivalent to forcing the motor to generate more momentum to keep hovering. This will result in more battery power consuming, and if you can, choose to fly indoors in windy weather.

Method 6: Choose a conservative flight mode

Almost all UAVs have multiple flight modes for you to choose. If you want to choose more intense flight mode, only need to increase the sensitivity of the remote control; otherwise, reduce the sensitivity of the remote control. Obviously more intense flight mode needs to consume more battery energy. You can purchase some high-quality rc model tools online.

Ten ways to extend the UAV flight time - part 2

Method 5: Avoid overcharging

Lithium polymer batteries are highly volatile. If the charging time is too long, it may cause an explosion or even cause a fire. Overcharging is not only dangerous but also shortens battery life.

Method 4: DIY yourself

Why not try DIY? With your own DIY quadcopter, you have better control over your battery life. Do not worry - it's not as difficult as you think. There are many online resources to teach you DIY step by step. if you plan to DIY, I suggest you read this article:

http://beginnerflyer.com/build-a-drone/. This article will at least teach you some quadcopter drone DIY foundation knowledge. You can also refer to these websites below:

RCGroups.com: RC Groups was founded in 1995 to help you meet like-minded four-rotor UAV enthusiasts. Here you can not only learn the knowledge of drones and how it works but also experienced flyers for you to answer questions.

DIYDrones.com: This online community is devoted to helping UAV novices learn how to DIY a Quadrotor UAV. As far as I know, the users on this site are friendly, open and helpful.

MultiRotorForums.com: This site is also a great resource for learning how to DIY a drone. Thousands of users are sharing their ideas and suggestions here every day, freely offering solutions. The site also has an "Activities" section where you can get the latest local drone information.

Method 3: Backup Battery

To date, one of the most common solutions to the problem of limited battery life for drone spaceflight is to purchase a backup battery. This method is suitable for UAVs that are easily replaced by batteries (such as X8C and X5SW) but not for UDI U839. In general, spare batteries are cheaper (about $ 5). You can buy at:

Amazon.com

Banggood.com (all kinds of rc drone parts at an affordable price)

Method 2: Remove the blade guard

Paddle guard is mainly used to protect the UAV propellers, but also has its drawbacks, they provide protection while increasing the weight of the UAV leading to shorter life. However, if you are not familiar with the UAV control method, I recommend not to remove the blade guard in a hurry. Because it is more important to protect the propeller than to fly for a few more minutes. We will recommend the Carbon Fiber Tube as it is super lightweight.

Method 1: Do not run out of battery

Our last advice is: Never run out of battery power during the flight as this will gradually shorten the battery life. We recommend flying with a battery charge greater than 20%. When the battery level drops below 20%, allow the battery to cool for a few minutes and then fully charge it. Such regular maintenance can help you extend battery life.

Key point

Keep in mind that these methods of extending the life of the drone have a limited effect and can not make your drone's duration soar from seven minutes to 14 minutes. Based on this premise, these methods are really useful and can help you get longer battery life. If you have other good ways or tips to prolong your drone's life, please feel free to share it in the comments section below.

What are your favorite retro vintage toys?

Do you have a retro complex? There are things that, if of good quality and designed with enough thoughts, can continue to be welcomed by the public for decades. Vintage toys, after the baptism of time, in the new era has been given a new meaning. Parents like to give their childhood favorite toys to their children, hoping to share and feel the happiness with their children. That’s why some Retro Toys are still very popular nowadays even though some advanced high-tech gadgets like Xbox, PSP, VR goggles, quadcopter are challenging their status. Here are some retro toys that are very popular among people and might be the perfect choices for the festival gift.

1. Aluminum Alloy Yo-Yo Ball Children Professional Playing Toys

The Aluminum YoYo Ball toy has blown the world for decades and it is still very popular among kids. If you have a YOYO ball that is super fancy and cool, all kids will admire you. It is undeniable that the YoYo Ball has become a hobby, a sport, or a culture that represents an attitude to keep vintage.

2. Classic Wind Up Rotating Airplane Carousel Clockwork Tin Toy

Wind Up Tin Toy is super classic and stylish. There are many kinds of wind up tin toys like the Rotating Airplane Carousel Clockwork. It has a wind-up motor with a removable key, wind it up and this airplane will whirl quickly and smoothly. This whirling airplane toy is a great souvenir from the good old days. This rotating airplane is a great toy for children and also a perfect collectible gift for adult.

3. 216Pcs 5mm Sliver DIY Neo Cube Magic Beads Magnetic Balls Puzzle With Box

Still seeking for the creative and unique Retro Toys for your baby? Need something amusing to help you kill the time? Come to look at this 216Pcs 5mm White DIY Neocube Magic Beads Magnetic Balls Puzzle Neocube Intelligence Toy here. It can be a magic cube to cheer you and your kid up. Due to the mutual attraction between the mini magnet poles, this magic cube can be combined into any geometry freely. All kinds of results are available in according to your creation and imagination. You will come up with countless shapes with no name since you are the first person to create them. Basically, you will never feel bored since you are able to create everything by your own idea. 

Why Kids Need Solar Powered Toys - part 2

Except for the Solar Power Car Kit which is a wonderful enlightenment for students' solar energy concept and new energy concept teaching, we keep finding and here are more funny and creative solar power educational toys for you and your kids. A good solar powered toy not just save money, but it is also completely safe for children, and very meaningful, so compared with the video game devices, the solar-powered toys are definitely the better choices.

2. 4 In 1 Solar Robot Educational Model Building Kits DIY

This Solar Toys Robot can be transformed into 4 different working models, namely the drill vehicle, t-rex, robot, and Insecta. Kids can build their own solar kit with these kits, so is a good tool to develop their imaginations and creativities, also ideal to express their interest in science, extremely helpful for your children on creative thinking. Great assembling toy for children to practice and empower their brain as well as becoming educated about the benefits of solar energy.

3. The World’s Smallest Mini Solar Powered Toy Car Racer

This Solar Power Car Toy is super affordable that you can’t believe. This cool little solar car needs no batteries, just powered by the solar energy, can directly start the engine in strong sunlight and keep running fast. It is eco-friendly, energy-saving, specially-designed and fashionable, and without doubt, it is a perfect teaching aid for students, a fun and educational way to learn about solar power. The solar cell generates electricity from sunshine that drives a miniature motor that turns the wheels. This little car can really move. The mini racer is small enough to go anywhere with a nice little carrying container. The car will also work when close to a strong artificial light source.

4. Educational Solar powered Ant Energy-saving Model Insect Toy Gift

The cute little Solar Powered Toys are the perfect gifts for children since they are educational and lovely. This little solar ant comes with a solar panel on its back, so it can be driven by solar power so that it can be a good pet or a good friend of your child. Specially designed with a solar panel, it is possible for keeping running under the strong sunlight. Hence it costs nothing extra energy but sunlight, fashionable and eco-friendly. 

Why Kids Need Solar Powered Toys - part 1

Solar energy as a renewable new energy, affect people's lives in more and more aspect. Now many people have installed solar water heaters, no pollution, very convenient, hot bath every day. New energy and new life given by the sun will change people's way of life. So what are the benefits of using solar energy?

1. universality. The area covered by sunlight is spread over most parts of the earth, and the light energy caused by different incident angles is different, but at least it will not be monopolized by a few countries or regions, causing the unnecessary energy crisis.

2. permanent. The solar energy is extremely massive since scientists calculate the deadline is at least six million years, for humans, such a time can be described as infinity.

3. non-polluting. The most widely used mineral energy source today, the more energy is depleted and the more pollution is generated. Solar energy is non-hazardous and polluting.

4. abundant. It is estimated that over the past 1.1 billion years, the sun has consumed only 2% of its own energy and that the sun will not change significantly in the billions of years so that the sun can be used as a permanent source of human energy. Endless, inexhaustible.

5. safe and feasible. Nuclear power generation will have the danger of nuclear leakage, once the nuclear leak will cause a great ecological crisis, but the solar energy is absolutely reliable.

Solar power makes our life so much better from every aspect of our life. It is a very good and environmentally friendly energy that needs to be used in a better way, that is why we invent the incredible solar power educational toys for kids hopping them to have fun and be grateful to nature at the same time. Since they are solar powered, parents no need to purchase the battery or charge the toy, which is more economical and handy.

1. 7 In 1 Rechargeable Solar Power Car Kit Educational Toy

This Solar Power Car Kit is so cool that it will be your children’s favorite. This cool solar car needs no batteries, just powered by the solar energy, can directly start the engine in strong sunlight and keep running fast. It is eco-friendly, energy-saving, specially-designed and fashionable, and without doubt, it is a perfect teaching aid for students, a fun and educational way to learn about solar power. It can be changed in total 7 different forms such as the truck form, the racing car form, the charging car form, the mini car form, like the transformers. What’s better, these kinds of solar panel toys have a very high efficiency, long life, high quality, fast charging panel, so no need to worry about the power and durability problems.

Why people all love squishy doll?

Squishy toys have been sweeping over the world especially on Internet this year and become one of the most popular toys on social media network like Facebook and Instagram. You must wonder why these toys can be so popular that the popularity is even higher than the robot, YOYO ball, RC car or other more complicated toys.

First of all, they are cute

There are tons of different designs of squishy toys on some online websites. You can definitely find the one you consider to be the most adorable. Some people love to purchase the squishy with phone strap or with a chain so that they can also be used as a cute decoration and be taken everywhere they go. The most popular squishy are food squishy like cake squishy, bun squishy, ice cream squishy and animal squishy like sheep squishy, panda squishy and puppy squishy. There are also other special squishy toys that are made in the shapes of monsters or elves which will look more weird and strange to cater special tastes.

Secondly, they are relaxing

Since our working times have already been very stressful and tired, during the break times or the weekend, to be honest, we are too exhausted to put efforts in some toys like assembling a robot or solving a puzzle. All we want just to relax and have a good mood! By squeezing the toys in different ways you want, at the same time, you will feel that you are also relieving the stress. Since this ice cream squishy are made of high-quality PU form material, so the rising times will be very slow up to more than 15s providing you the best soft and comfortable touch feeling.

Last but not least, they are attractive

No matter where you take the squishy doll with you, people around you will be crazy about it. I bet you will gain lots of ‘likes’ on the social network if you post a photo of your own squishy and some of your friends will feel jealous. If you can’t decide which one to purchase since there are so many cute squishy dolls you like, I will recommend you to purchase the star squishy package which will include many popular squishy toys in the package at a very low price, so you can share more fun and save more money at the same time.

What toys should you send to your children for Christmas

Christmas is coming and lots of parents are having troubles about the Christmas presents for the children or basically everyone is having a hard time find a suitable Christmas present for their friends and family members. I guess, before you purchase the presents, you should first try to know more about them, find out what they like and what they need. Here are some recommendations for you, which might be the perfect Christmas presents for differences kind of person.

For outdoor lovers

If you have a friend who really loves outdoor sports or traveling, or your children are interested in photography, why not choose the latest tech hit - 4k fpv drone? This might be a relatively expensive present since many high-class unmanned aerial vehicles will cost thousands of dollars. However, for beginners, I will recommend the xiaomi 4k drone which is not that expensive but also professional enough to satisfy all your needs. The 3-axis gimbal RC Drone Quadcopter with 1080P Wifi FPV 4K camera at 3840 x 2160 pixels, you can see the 720P video on the screen. With Pointing flight feature, the drone can fly to the point you touch and automatically fly the path you want. It can also fly the routes you set controlled by APP. GPS + GLONASS + vision-based positioning + unbelievably lightweight design + 3 axis gimbal, it stabilizes up to 2000 vibrations per second. Intelligently detect low battery and return home automatically with real-time location tracking for easy retrieval.

For DIY lovers

If your children love to study computer and technology gadgets, here is the robot that he or she will fancy about. Xiaomi MITU DIY Mobile Phone Control Self-assemble Robot will offer you a good time with your children assembling the robot together. I bet when it is finished, you will be full of the sense of achievement. The amazing xiaomi toys are controlled easily by APP such as the stick, gyroscope, and path. The accuracy of Robot parts can reach 0.005mm high precision supporting Graphics Modularization programming and you can assemble the parts by your one design, so you can make the best use of your creativity.

For fun and happiness

The hand spinner is the most popular toy these days since everyone from children to adults to the elderly will all enjoy it very much. They are not expensive at all and have many different looks to choose. They will make you feel relaxed and amused, so had spinner is the perfect present for basically all the people.

Flight Controller For the RC Drone Lovers

In the recent news section, there was the news in the ‘new atlas’ on Feb 17th, 2017 about the sky hopper which is the best technology for the eye-catching manned multirotor project when it tested and pictured in the news. The handful teams built it and made it perfect to use to get the amalgamation of every possible indication under the personal flight jet with the industrial grade side of things. The future transport mix makes it perfect with such flight controller examples in the assembly. The manned multicopter now a day using as the personal flight aspect which is all about the personal flight dilemma to get the industrial thing in it. The heart of a multirotors is the one thing only which is known as the flight controller because it makes it more stable and controls unit against anything bad happened to them.

The gps module is another thing which is considerable under the approach to create the FPV freestyle copter to get the industrial aspects in the usage. The Racing drones are other types of drones which provide the video in the Aerial mode and have the functional approach to the GPS control. The GPS module hold is the good thing which makes the altitude for the autonomous flying missions as per the clean flight and the base flight during the designing consideration. The f4 flight controller is the processor type to evaluate that how it could take things in the right direction for the optimum prototype manufacturing. The STM 32 processors are different with the usage because it is all about the computer modeling with the fact of slower processing and the speed which relate to the prototypical association.

The whole prototype depends upon the working and efficiency of the processor under the immediate link with the design. The process of f4 flight controller is something which is best for the RC drone lovers because they are looking for the most catchy design with speed. The same speed and prototypical authority can be sensed with the need of drone lovers indeed. The recent changes in the Naze 32 flight controller(naze32 flight controller is used widely on top-level RC drone) make it more attractive for the best auxiliary connectors which make it best with the mixtures of the soft serial as per the input and output energy differences.

The I2C connector and its location are important as well which make in industrial friendly and found that how it controls the voltage monitor under the USB connection approach. The connection with the PC through the USB is something which is relevant that how the board uses it as the central command. In the end, it is important to review or rate the new changes made to the flight controller either it is F4 or naze 32 which is best for the functional approach. These are some controller which measures the quality as per the system linkage and have the idea to reflect the system efficiency with the modeling. The radio settings in the flight controller are a big achievement indeed.